Optional four-nozzle water-cooled mist package for the DJI Agras T100.This setup increases the T100 spraying system from the standard two sprinklers to four optional mist sprinklers. It raises maximum spray flow from 30 L/min to 40 L/min while keeping an adjustable 50–500 μm droplet range. The redesigned liquid path also helps carry heat away from the centrifugal sprinkler motors during operation.Key features Four optional mist sprinklers Maximum flow rate: 40 L/min (about 10.6 gal/min) Adjustable droplet size: 50–500 μm Designed for higher-flow and canopy-penetration applications Water-cooled flow path helps dissipate motor heat Compatible with the DJI Agras T100 spraying system Actual spray width, coverage, and droplet selection depend on application rate, speed, crop canopy, height, and field conditions. Contact TJ Aerosense if you want help deciding whether the four-nozzle setup makes sense for your operation.

Dual-battery lifting system for the DJI Agras T100 when longer lifting endurance matters more than maximum payload.The dual-battery configuration carries two flight batteries at the same time and is rated for an 80 kg (176 lb) lifting load. DJI also adds an emergency cable-fuse escape function to this version.Key specs Load capacity: 80 kg (176 lb), including rope and hook weight Supports two batteries simultaneously for longer endurance 10 m lifting cable included Recommended cable length: 10–15 m Emergency cable-fuse disconnection/escape function Compatible with the DJI Agras T100 Important: The standard single-battery T100 lifting system is rated for a higher 100 kg load. Choose the dual-battery version when added endurance is more important than maximum lifting capacity.

DJI T100 spreading system for fertilizer, seed, and other compatible granular material applications.The T100 spreader is the high-capacity option for operators who want to use the same aircraft for both liquid application and dry-product work. The large hopper and high-flow screw-feed system are designed for fast loading, consistent material delivery, and high-acre output.Key features 150 L spreading tank Up to 100 kg (220 lb) spreading payload High-flow screw-feed spreading system Interchangeable feeder options for different granular materials Designed for fertilizer, seed, and other compatible dry products Actual spreading rate and width depend on the material, density, granule size, flight settings, and conditions. If you are trying to set up a T100 for a specific product, contact TJ Aerosense and we can help with the hardware and operating setup.

OEM DJI DB2160 Intelligent Flight Battery for the DJI Agras T100.The DB2160 is the T100’s high-capacity flight battery, built around a 41 Ah / 41,000 mAh pack with an ergonomic handle and triple air-channel cooling to help move heat out of the battery between flights.Key specs Capacity: 41,000 mAh Nominal voltage: 52 V Weight: approximately 32.4 lb (14.7 kg) Designed for ultra-fast charging with compatible DJI charging equipment Compatible with the DJI Agras T100 If you are putting together a T100 battery/charging setup and are not sure how many batteries you need, contact TJ Aerosense and we’ll help you size the system around your acres and charging setup.

OEM DJI 65W USB-C portable charger for compatible DJI remote controllers and other supported USB-C equipment.This is the charger commonly used to keep Agras and Enterprise controllers powered in the shop, trailer, or field. It is compact enough to keep with the controller and pairs well with the WB37 charging hub when you want a simple controller-battery charging setup.Key details Up to 65 W output USB-C charging Compatible with supported DJI Agras remote controllers Useful for controller and WB37 charging setups If you are not sure whether this is the correct charger for your controller or charging hub, contact TJ Aerosense and we’ll verify it before you order.

OEM DJI charging hub for WB37 Intelligent Batteries.The hub holds two WB37 controller batteries and charges them through a USB-C power source, making it an easy way to keep spare controller batteries ready during long spray days.Key details Holds 2 × WB37 Intelligent Batteries USB-C power input Pairs with the DJI 65W Portable Charger Used with compatible DJI Agras and Enterprise controller setups If you are not sure whether your controller uses WB37 batteries, contact TJ Aerosense and we’ll verify compatibility before you order.

Complete 100 L spraying system for the DJI Agras T100.The LS100 spraying system uses a 100 L tank, two magnetic-drive impeller pumps, and dual atomizing centrifugal sprinklers in the standard configuration. It is built for high-volume agricultural spraying with adjustable droplet size and high flow capability.Key specs 100 L spray tank 100 kg operating payload under DJI-rated conditions Standard configuration: 2 sprinklers Maximum standard flow rate: 30 L/min Optional 4-sprinkler mist setup: up to 40 L/min Adjustable droplet size: 50–500 μm DJI-rated effective spray width: 5–13 m depending on operating conditions 2 magnetic-drive impeller pumps If you are replacing a damaged T100 spray system or building a different T100 configuration, contact TJ Aerosense and we can verify exactly what you need before ordering.

Aftermarket butterfly propeller clamp set for the DJI Agras T100.These clamps help secure and stabilize the T100 propeller assemblies and are a good spare to keep on hand for transport, seasonal maintenance, or replacement if a clamp becomes worn, loose, or damaged.A complete T100 uses 8 butterfly propeller clamps, so this package includes a full aircraft set. Designed for DJI Agras T100 Includes 8 butterfly propeller clamps Full-aircraft replacement set Useful spare for operators who want to avoid downtime during season Package includes: 8 T100 butterfly propeller clamps.Aftermarket accessory. Not manufactured by DJI.

Aftermarket protective rubber pad set for the DJI Agras T100.These pads are designed to cushion contact points on the aircraft and help reduce rubbing, vibration, and wear during folding, transport, and handling.This package includes 4 rubber pads for the T100. Designed for DJI Agras T100 Includes 4 protective rubber pads Helps cushion contact points and reduce wear Good replacement or spare set to keep on hand during season Package includes: 4 T100 rubber pads.Aftermarket accessory. Not manufactured by DJI.

Aftermarket protective cover for the remote controller used with the DJI Agras T100.The hinged cover helps protect the controller screen and control face during transport and storage, then flips open when you are ready to operate. Designed for the DJI Agras T100 remote controller Hinged cover opens for normal controller use Helps protect the screen and controls from scratches and bumps during transport Includes mounting hardware shown in the photos Package includes: 1 controller protective cover with mounting hardware.Aftermarket accessory. Not manufactured by DJI.